On stock: 89 | SKU: 10-led-blue

10 blue LED - 5 mm

On stock: available | SKU: 10-led-green

A set of 10 green LED diodes with resistors

On stock: available | SKU: 10-led-res

10 red LEDs with resistors, ready to use with Arduino

On stock: 191 | SKU: 10-led-yellow

Dziesięć żółtych diod LED, średnica 5 mm, dyfuzyjne

On stock: 23 | SKU: 10-led-bar-blue

10 blue LED diodes in a single package, each with individual pins

On stock: 11 | SKU: 10-led-bar-green

10 green LED diodes in a single package, each with individual pins

On stock: 24 | SKU: 10-led-bar-red

10 red LED diodes in a single package, each with individual pins

On stock: 21 | SKU: 10-led-bar-yellow

10 yellow LED diodes in a single package, each with individual pins

On stock: available | SKU: 5-rez-10k

A set of five 10 kOhm resistors

On stock: 10 | SKU: rgb-led-strand-25

Each diode can be set to different colour, one of 16 million

On stock: 71 | SKU: sn74hc4040n

SN74HC4040N od Texas Instuments

On stock: 10 | SKU: CD74HC4067-brk

Connect 16 analog or digital devices to microcontroller using only 5 pins

On stock: 91 | SKU: 74hc4067e

Przełączaj 16 kanałów.

On stock: 20 | SKU: battery-box-2aa

A convenient holder for two AA batteries equipped with a switch

On stock: available | SKU: 5-rez-2k2

A set of five 2.2 kOhm resistors

On stock: 9 | SKU: 2.2-tft-adapter

2.2" TFT breakout board, microSD connector, SPI interface, true 18 bit color

On stock: 30 | SKU: kit-lcd-2x16

2x16 characters LCD kit ready to use on a breadboard

On stock: 26 | SKU: 2x16-lcd-shield

Shield with alphanumeric 2x16 blue LCD display and 5 buttons

On stock: 7 | SKU: el-inverter-3

Inverter for ElWire - input voltage 3V

On stock: 29 | SKU: battery-box-4aa

A convenient holder for four AA batteries equipped with a switch

On stock: 242 | SKU: 6n138

When you want to provide galvanic isolation between two circuits

On stock: 27 | SKU: 74hc00

Quad 2-input NAND gate

On stock: 5 | SKU: rtc-ds3234-adapter

DS3234 RTC module - perfect when you want to measure time precisely

On stock: 67 | SKU: adafruit-motor

Want to build a robot? This shield will help

On stock: 6 | SKU: 6dof-itg3200-adxl345

Mała płytka dająca 6 stopni swobody - interfejs I2C

On stock: 4 | SKU: 9dof-razor-imu

Mała płytka dająca 9 stopni swobody

On stock: 30 | SKU: tmp102

Dokładny czujnik temperatury z interfejsem I2C 3.3V

On stock: 4 | SKU: 9dof-sensor-stick

Trzy czujniki na jednej płytce, razem 9 stopni swobody (9DoF)

On stock: 5 | SKU: rfid-usb-reader

Adapter czytnika RFID na USB

On stock: 29 | SKU: rfid-id-breakout

Płytka drukowana - adapter dla czujników rodziny RFID ID.